Interested to Buy Any Domain ? << Click Here >> for more details...
What is the diffirence between Earth and Neutral
and What is the required normal voltage between earth and
neutral
- 6 Answers
- 11207 Views
- I also Faced
- E-Mail Answers
Answer Posted / h.shastri
jasmeet is true but in case of sensitivity like PLC
application, this diffetrence MUST be less then 0.3V
| Is This Answer Correct ? | 6 Yes | 1 No |
Post New Answer View All Answers
all types of liquid analyzer principle with drawing?
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
what is interface level measurement.who can calibrate interface level measurement transmitter online
Actual using of tube bender to bend 2 opposite 90 deg at correct measurement center to center of tubing.
What is first echo & echo window in radar type level transmitter?
Can anyone convert a 5/2 way or 3/2 way valve into an ISO valve?
Identification of control valve parts.
With N nodes and B branches what will have a network ???
hello sir/madam, I,Subramanian need 5yrs placement papers of officer trainee of Instrumentation technology.pls send to this mail id mani_nxtgen@yahoo.co.in please do the needful. with regards, subramanian.v
If i have 4 Allen Bradely make RS logix 5000 PLC and for viewing that we are using 4 RS view SCADA for 4 different packages. Now, I will want to view two packages on only one SCADA. Then how i will do it?
how u choose thermowell lenght n pnumatic C/v size?
how to calibrate corollaries (Mass flow meter)?
WHY THE DEGREE OF VALVE PLUG AND VALVE SEAT IS SLIGTLY DIFFERENT I CONTROL VALVE TRIM DESIGN
WHAT ARE THE INSTRUMENTAL DIAGRAMSOF VALVES?
What is hp & mp seperator .& what is its working principle ?
