Interested to Buy Any Domain ? << Click Here >> for more details...
1.Difference between vcb and Acb and partes.
2.Difference between STS and ATS.
- 2 Answers
- 7689 Views
- I also Faced
- E-Mail Answers
Answer Posted / dips
VCB means vacuum CB
ACB means air CB
| Is This Answer Correct ? | 5 Yes | 2 No |
Post New Answer View All Answers
What happen Grid EARTH plat got cut.
Why squirrel cage motor can only use with low starting loads ?
What will be the effect of circulating current in HT xlpe cable when both the armour ends are grounded. Will the termination fils after some time in case of 33 kv supply.
What are the operation carried out in thermal power station?
what is transient stability analysis means?
can anybody sent me power grid questions. what subject should i prefer for preparation?
What is the pro & con of having 11kv & 33kv incoming, and what is the adv & disadv. of converting from 11kv to 33kv.
why surge protectetor work explain with the help of circut diagram?
Which Class insulation is prefered for the sandwich Busducts ? Why?
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
what will be project cost for 100 kv transformer connection under oyt scheme.
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
ELECTRICAL ENGINEER TEST IN FEWA ANY ONE HAVE KNOWLEDGE ABOUT THIS?????????
What is the use of bundle conductors?
What are the basic elements used for modeling mechanical rotational system?
