How many no. of earthing pits required for commisioning a
new 320KVC DG Set????How????
- 6 Answers
- 9652 Views
- Emerson, I also Faced
- E-Mail Answers
Answer Posted / sam
we need 4 earth pit or 2 earth pit why iam mentioning it as
4 generally 16 feet depth earth is needed for body earth
and 16 feet for nuteral earthing its complicated to dig
16feet pit so we can split it as two 8feet. but there should
be 10 feet deference between body earth pit & nuteral
earth pit
| Is This Answer Correct ? | 3 Yes | 4 No |
Post New Answer View All Answers
Why is water motor not taking the pressure? what is the problem?
what is the minimum clearance between a 11KV 150KVAR capacitor cell and series reactor.can a series reactor can be mounted in the same structure of the capacitor cells structure
Which contains in POLE ASSEMBLY of a 11KV Kirloskar-make SF6 (Model No-FP620A12)? Will u clarify with drawing?
What is given by the definition in BIL IMP/PF = 950/395 kV. This was found in a name plate of a power transformer.
how circuit breaker work.. what is the operations taking place inside a circuit breaker when an overcurrent occurs... is it similar to fuse?
What is T’Q and X’Q and X’D ? and what is saturated as well as unsaturated ?
1- What is the Polarization Index number be good for 15KV 3c#500MCM electrical cable? 2- Can I use the IEEE Std 43-2000 to perfom the PI test? Thanks
What happened when capacitor connect series in ac circuit?
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
What is the most accurate way of testing ELCB?ELCB is better than RCD?
difference between high and low impedance BUS BAR relay??
The 3 phase 400 hp 440 volt slip ring induction motor do not take one phase amps why ? The motor is running good condition
How to calculate MCB Breaking capacity.
In single phase capacitor motor, if the motor rotate reverse direction then how much power will be consumed by the motor and why?
how test transfomer(3 phase75kva) by megger
