Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / rajavel
capacitor can be tested by connecting any one terminal of
the dc voltage(either +ve or -ve) directly and other one
terminal through lamp.if the lamp continuously glows then
the capacitor is short. if the bulb is not glow then the
capacitor is open.
and another method is by multimeter by putting in diode
checking mode we can observe initialy it shows 0 and
grarually the voltage is increasing and then it goes to OL
| Is This Answer Correct ? | 12 Yes | 8 No |
Post New Answer View All Answers
how we calculate electrical load on a building according to area?
i need list of swg(standard wire guage) or area of conductor v/s current carrying capacity of conductor copper & alluminium...
how to calculate the change over time for star delta starter for different KW motor?
what is mppt (maximum power point tracking ) and how they used in solar power generation ??? what are the main components used in mppt?????
As you achieve greater success with the company after some years, Will you like to be a share holder in our company?
how to calculate the earth mat design in 132 kv substation yard ????
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
how many single tension hardware are required on a double circuit transmission tower?
What is the function of under voltage release ?
what r the safety measures in UPS ? explain all?
How to reduce the static electricity producing in solvent room? By P.D.Patil BioCon
What is deference between MCB & MCCB & ISOLATOR
what is the minimum clearance between a 11KV 150KVAR capacitor cell and series reactor.can a series reactor can be mounted in the same structure of the capacitor cells structure
What is the height of DA, DAL, DB, DC & DDE tower?
how to calculate micom relay earth falt time and current sertting
