Interested to Buy Any Domain ? << Click Here >> for more details...
During he starting up of the motor, the upstream's MCCB
(350A) always trips due to the UVT relay activated.
Can Star-delta starter use for a 20kW Motor (For a powder
mixer machine) cause voltage-dip in the supply line voltage?
If so, what are the recommended solution to
eliminate/reduce the transient voltage dip in the line
voltage?
- 4 Answers
- 6912 Views
- I also Faced
- E-Mail Answers
Answer Posted / abdulsubur
up to 3kw Dol startor
up to 7kw we can use Star delta startor
| Is This Answer Correct ? | 2 Yes | 3 No |
Post New Answer View All Answers
What should be current in the Primary and secondary side of 1000KVA (11KV Supply)Transformer.?
why is the power generator connected as star earthed or star earthed through reactance and what its features ?
what r substations?what r there work?why voltages r incresed and then reduced during distribution of power
In case of HV test on medium voltage cables, BS is asking for 4 U0 where as IEC is asking for 3.5 U0. Can any one advise me how this 3.5 times or 4 times U0 is derived?
In a power conditoining unit (inverter) of a solar plant when we measure the d.c. current fed by different strings of solar plates to inverter, the current in the negative wire is less almost by 1 ampere to the current in its positive wire say current in positive wire 5 A , then current in negative wire of the same string is 4 A. Since the current entering should be equal to current leaving then why the current is noticably less in negative wire.
What aturn on methods of scr?
what is The difference between national electrical code and I.S.Code (electrical) and what is the value of NEC in electrical engineering field
how to know the diffrential relay setting of 06mva step- down (delta-star)transformer?
What is Scheme Test of High Voltage Switchgear. Which tests it includes.
what is the use of vcb & isolator in substation?
Draw the vector diagramme for Asynchronous Induction Generator at noload,half load and fullload.
What is the implications when 600 hp motor is started when the unit is running with Transformer of capacity 1500 KVA and DG set of 1000kva
what is two point starter?
# 4 hi friends i m from electrical branch and seeking for tech. + apti. both papers of hpcl plz get it available as soon as possible my email id is sumit_lig189@yahoo.co.in
What is the minimum distance to be maintained in between HT panel and LT panel and Instrument panel as per IEC and NEC standards?
