Interested to Buy Any Domain ? << Click Here >> for more details...
what is skin effect? why is it absentin dc system
- 22 Answers
- 46151 Views
- I also Faced
- E-Mail Answers
Answer Posted / suresh reddy
SKIN EFFECR WILL OCCUR ONLY IN AC CABLE & THIS PROBLEM WILL
APPEAR IN SOLID CONDUCTOR
EX-- CURRENT ALWAYS TENDS TO FLOW LOW RESISTANCE PATH SO
THAT HERE THE ELECTRONS ALWAYS TRYS TO FLOW IN WIDE AREA
THAT IS THE OUTER SURFACE OF THE CONDUCTOR BECAUSE INNER
SURFACE HAVING HIGH RESISTANCE AS COMPARED TO OUTER SURFACE
FINALLY I WOULD LIKE SAY THAT TENDENCY OF CURRENT FLOW ON
SURFACE OF THE CONDUCTOR IS GREATER THAN INNER SIDE
TO REDUCE SKIN EFFECT
1 BY USING STRANDED FLEXIBLE COPPER CABLE INSTED OD SOLID
| Is This Answer Correct ? | 3 Yes | 9 No |
Post New Answer View All Answers
How to calculate of maximum demand if given 628kw, 785kva, 0.8 p.f.
Hi, My plant daily consumption is calculated as 3.8MWH but my supplier has sanctioned an power of 2.6MW per day. how can i equal or distinguish this two factors
The sodium vapor lamp is not glows when it is connected a distance of 5 meters above from gearbox, why ?
What is transient Phenomenon?
How two nos. 130 kw D.C motor get synchronise using D.C drive.
Write down the brushes of a de machine.
Why is ignitor used in sodium vapour lamp
What current flows in the transformer primary when its secondary is open?
I have a drawing of a wound rotor induction motor for a crane. This crane motor has 5 forward speeds & 5 reverse speed implemented of course with different amount of resistance for each speed setting selected. What has got me scratching around is the fact that 8 of the 10 speed selections switch in uneven (unbalanced) amounts of resistances on each of the 3 connections to the motor's rotor.Can this be possible? I would have assumed this would produce unbalanced rotor currents and therefore vibration in the motor. I would greatly appreciate anyone's comments on this. Many thanks, Confused.
one conductor length is L.and i am strech uniformly this conductor and made length is 2L.so resistance of this strech conductor is R=4R..but i want to know about area of stech conductor hows it become a/2..
what is meant by neutral compensation factor and where it is used
what will happen if synchronous machine rotor fed from single phase ac supply
I'm generating a pulse of 3V with frequency 80Hz (12.5ms time period) and pulse duration 0.125ms and feeding it to a transformer since i want the pulse to get amplified around 60V. At the output amplification s happening but the pulse is changed to a spike, can you tell me what could be the reason? (an ordinary transformer 220V-12V stepdown transformer is reverse connected ie. now it is 12V-220V stepup and voltage amplification happens)
A 230V dc shunt wound motor has an armature resistance of 0,15Ω.When operating on no load at 650 rev/min the armature current is 6A . The motor takes a full load current of 85A. Calculate the full load speed if the field flux is (i) maintained constant (ii)reduced by 0,03
Define norton equivalent circuit?
