Interested to Buy Any Domain ? << Click Here >> for more details...
1> what r different types of fault in cables? How will u
locate and test these faults?
2> why earth wire is provided on top throughout the
transmission line. why not only on towers? How much area it
can protect?
3> what r different types of transmission losses? How power
loss can be minimized?
4> what is the % of power loss on transmission lines?
- 3 Answers
- 10898 Views
- IOCL, I also Faced
- E-Mail Answers
Answer Posted / rvg
The most frequent faults are short ckt faults and earth
leakage faults and insulation breakdown.. Due to these,
some part of the cable( specifically, underground) get
heated up and burst.
Locating such faults, some wheastons bridge system can be
used.
2. the earth wire above the conductor can protect the live
conductor from lightning surges.up to 30 deg.down max it
can protect from horizontal level. In distribution system
normaly does not require bcz the height of such post may be
as small as 11 mtr, but that of 33kv or 220kv may be as
high as 28 or 35 mtr.
3.transmission losses are copper heat loss and corona loss
and insulation loss.( refr Power system by UPPAL)
4.6-12%
| Is This Answer Correct ? | 19 Yes | 2 No |
Post New Answer View All Answers
what is the advantages og idmt relay over magnetic relay??
whatare the disadvantages occur,if the form factor of transmission will not be equal to 1.11
what are the condition that makes hooter blow?
Explain the operation principle, advantages and disadvantages of the following converters: a) A 12 pulse converter b) A Switch-mode inverter c) A thyristor inverter
how could we know the size of cable by physical view?
how a flip flop can be used as a latch?
why sometime we get electrical shock while touching the ballon of dish tv connection ? which we should not get.
What are the types of transformers according to the arrangement of iron cores?
If a transformer primary winding operates at 240v, the secondary at 120v and the load is 1500w & the transformer is rated at 92% efficient, what's the current flowing through the primary winding of the transformer? What is the formula for finding this?
Draw a SLD of DG distribution up to main LT panel?
what are the principles of a booster converter?
which type of amplifiers are used in multimete?
which model T or pie model is prefarable in power syatem
How is operate breaker failure scheme in substation
what are the different kind of cables used for transmissions?
