Interested to Buy Any Domain ? << Click Here >> for more details...
What are methods to avoid the inrush current at the time of
starting of power transformer ?
- 8 Answers
- 14035 Views
- Wipro, I also Faced
- E-Mail Answers
Answer Posted / karthikeyan
Its recommended to install an CLR (Current Limiting Reactor)
befroe the Power Transformer to reduce the inrush current.
| Is This Answer Correct ? | 3 Yes | 7 No |
Post New Answer View All Answers
What happens to voltage when current through the inductor is constant?
What is a DC series motor?
What is PEC??Applications........
Usually in the L & T make MCC feeders' power circuit,we have BMR after the MAIN CONTACTOR.,can we interchange their position, keeping the control logic same???
Is a contactor (or master relay) required between incoming lines and a VFD? The question goes to safety. If a contactor were used before the VFD and an e-stop engaged then the motor will coast to a stop (i.e. VFD loses power) instead of stopping much faster if the VFD braking fucntion were used. It would make more sense to keep power on the VFD.
I want to ask that is there any relation between current denesity of copper and material purity. also is ther any standard which defines the standard current denesity of material.
working principles of cf lamp,incandescentlamp and f lamp?
What is Annunciation?
How to dimensioning SDCCH, LAPD and CS7 signaling on GSM?
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
What is the capacity of the Fastners 12mm?
what the principle of sincroscope?how it works?when it needed?
What is the equivalent circuit of a transformer and its vector diagram?
how we decide scurt (disc) of insulator with respect to kv rating
What is resistance reading of earth copper rod with grid and without grid?
