Which has error correction? (choose all that apply) Connection Oriented Connectionless oriented
1 2509You are setting up a 100 Mbps network in a building, which is pre-wired. After testing you decided that the cabling is category 3 compliant. What do you do? a. Keep existing b. Change to category 5
1 3262You want to connect 2 buildings together that are 1000 meters apart and communicate at 100 Mbps and provide some security on the cable. What do you choose? a. Fiber optic
1 3050Your HOSTS file looks like this: 123.34.19 product 123.23.45 develop you can ping 187.123.34.19 , but you cannot connect \product etapps . Why ?
1 2364Your HOSTS file looks like this: 11.12.13 UNIX programmer # Programmers FTP server 11.12.14 server 11.12.15 UNIX developer #Developers FTP server 11.12.20 developer # developer you try to ftp developer, you can connect to the right server. But you try ftp 10.11.12.20, you fail to connect. Why?
1 2701Two subnet of computers. the subnet on the left has a server called L_SERVER and A workstation called L_WKST1 and the subnet on the right has one server called R_SERVER. L_WKST1 can connect to R_SERVER, but L_WKST1 can not connect to L_SERVER server on the same subnet. Why?
1 2770Host ----router ----server Class B network. host's IP : ...82.2 , Mask: 255.255.240.0 router's left IP-address is ...64.1 router's right IP-address is ...32.1. Why can the host not access the server ?
1 2684Your workstation can ping itself by ip, but it can't ping ip of the others on the same subnet. why? (The physical connection is OK).
1 2794All IP addresses are eventually resolved to network interface card addresses. Which of the following is used to map an IP address to a network interface card address? a. WINS b. DHCP c. DNS d. ARP
1 2696Which layer addresses the stations attached to the transmission medium and the next higher protocol that used the transmission service.
1 2496Post New Networking Administration Questions
Define nat?
Define network topology?
What is meant my data qutoe error In ms office
Give some drawbacks of implementing a ring topology?
how to add additional instances sar r3, what are the steps to take server is down.
How do you remove Meta only for the root slice? Remaining slices should run under Meta?
how i can Design a client–server network with two servers operating at 100Base- T Fast Ethernet speed and the clients operating at regular 10Base-T Ethernet speed using a 10/100 Mbps NIC. The hub is located in a wiring closet, but the servers and clients are not. Assume that a satisfactory performance is achieved at 40% utilization of the LAN.
one server is down it doen't display anything what you do?
What will happen if we send untagged packet to a tagged port
in vcs, which network[private or public] channel bandwidth is high?
Explain the difference between csma/cd and csma/ca?
what solution for High Utilization Cisco router 2851 ? please Need Help ASAP.
Define firewalls?
What is network management?
Explain backbone network?