Interested to Buy Any Domain ? << Click Here >> for more details...
What is the difference between "Earthing" and "Neutral"?
- 10 Answers
- 15843 Views
- Power Grid, I also Faced
- E-Mail Answers
Answer Posted / amit kumar sharma
There is almost no difference. Neutral & earth works same.
Only switchgear connected acts differently. ELCB works on
leakage of phase to any part of equipment resulting into
grounding, whereas MCB and other protective relays
activates on overload or short circuit on phase neutral
circuit.
| Is This Answer Correct ? | 6 Yes | 34 No |
Post New Answer View All Answers
how many stairs have you climbed while you were coming
1. What is differential relay? How it operates? 2.How to calculate the Short Circuit Impedance in Transformer? 3.What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works? 4. While testing the 33KV Busbar by using Hipot kit, what should be the test voltage we have to apply? 5. What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer? 6. Explain how you can give the overload setting to any Motor Protection Relay for a HT motors with formula and example? 7. Why restricted earth fault protection is needed? Why can’t differential Protection is sufficient? 8. What should be the minimum and maximum ohmic value for earthing? 9. Why DC Currents are not used in transformer? 10. What is the Frequency while we step up the voltage from 220V to 11KV? Is it possible? Explain it?
how copper and aluminium wires or cables are choose for current rating? please provide copper and aluminium wire selection chart for different current rating ?
what is Fault level? why it is calculated? how will u decide same for our plant?
How to know any size of cable if there are not written on cable? Answer must be theurical not by experience.
Which type of questions well asked. ?
In 90 kva alternator that produce the output voltage is 115(p-n),200(p-p) at 1500 rpms means what ampere it produced ?
how we start 40w tube light with 4 diodes,2capacitors,1 choke and without starter.(a product avilable in market which lights burnt tube lights also)
If we need4× 50mm sq cable but it's not available so we can pull 4×25mm sq 2cables
WHY BLADE & JOW OF ISOLETOR IN SUBSTATION?
Who are the manufactures those manufacturing 3Cx2.5sqmm FRLS cables. I heard about FRLS technology adopted only in wires useful for wirings
WHAT IS AIR GAP VALUE IN MM FOR A 11KV BUSHING OF 11KV/440V DISTRIBUTION TRANSFORMER. AND AIR GAP VALUE OF 25 KV BUSHING OF AT TRANSFORMER OF 25 KV TRACTION. WHAT IS THE CALCULATION FOR THE AIR GAP PERMITTED FOR BUSHINGS AT DIFFERENT VOLTAGES.
How to check the thermocouple is correctly connected to cable for K type? (i,e positive pole is connected to non magnetic conductor and negative pole is connected to magnetic conductor)
why electronic instruments is more favorable than electrical?
in ACB breaker requireding 3200Amps. buscoupler getting OFF mode and again it reset and getting normal position give me a required answer?
