whether the generating voltage can be made to be
transmitted by means of signals to the recieved end or at
the consumers end?
- 6 Answers
- 7539 Views
- TCS, I also Faced
- E-Mail Answers
Answer Posted / venkatesh
No
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
What is cross over distortion? How it can be eliminated?
What are the advantages of stationary armature and rotating field system?
Transmission through a short line depends on
Why sometime AVR and sometime Booster coil is used in Alternator? what is the diferance between AVR & Booster coil due to which they are selected
how to modify DOL control panel into Delta Y connection?
Whether amorphous core transformer is commercialized or not:Name of company making amorphous core transformer and what are different rating?
how does a submersible pump work..?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
please send me last 5 year interview questions
How do i right a ladder diagram that has 1 actuator that performs a full stroke followed by a half stroke
11 kV line deraction check by an Engineer.
What are gain margin and phase margin?
what is mean by NPS (Negative phase sequence)fault? what is the difference between EFR & OCR faults?
physical identification of HT & LT panel
What is Annunciation?
