Answer Posted / ankaraju.k
resonant converters
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
Why is ignitor used in sodium vapour lamp
What is the difference between indoor and outdoor transformer
what is mathed of check the D.C MOTOR 181 KW (ARMATURE AND FIELD) WHAT IS THE MATHED OF CHECK THE THYRISTOR MODULE (HIGH CURRENT)
WHAT IS START TO INDUCTION MOTER IN STAR TO DELTA OF >5HP ?
what is doubling factor in making current of a breaker?
Dear sir, In our plant have Station Transformer having capacity,i want to know, why LV side 40 - 40MVA is given? & how we can get 6.3 KV supply from tertiary(i.e. Open delta connection), Vector Group YNyn0 - yn0 +d MVA Rating 80MVA / 40 - 40MVA + 26.7MVA Voltage rating 420 (Tap range +6,to -10)81.25% /11.5KV - 11.5KV +6.3KV
What is different bewteen low or high impedance busbar protection scheme
What is magneto on a gas generator. how it functions. its out put is d.c or a.c. how it can be checked for correct functioning
what topics we have to concentrate for power grid et.written test.and tell what to read for english synonyms and antonyms.
the site measured knee point voltage of protection class CTs should be greater than rated knee point voltage? what about meetering class CTs. Should it be below the rated knee point voltage?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
How to do cable earhing? whether by grounding Armour to ground or by running extra G.I wire along with cable? which one is preferred mostly amoung them? If the second one is more preferable how many GI wires to be run along with cable (1 or 2)?
What are the Return ( Monthly / quarterly/ Annual submitted to Electical Inspector for an establishment (Factory in Maharashtra-- Small scale category having seperate HT line of 22KV ) as per Maharashtra Electricity Act
How to synchronization will be done between two DGs ?
What is principle of Floroscent tube 36watt.