Interested to Buy Any Domain ? << Click Here >> for more details...
Hi, I'm going to attend BHEL interview for exexutive trainee
(ET ) on 22nd DEC . Till now if anyone attended the
interview pls help me out regarding the interview. I'm an
electrical engineer
- 3 Answers
- 9850 Views
- Bhel, I also Faced
- E-Mail Answers
Answer Posted / ashraf majid
BHEL's interview will mainly consist of questions regarding
ELECTRICAL MACHINARY and its CONTROL. The questions
relating to electrical machines will be based on simple
fundamentals of Electrical machines.These will include the
questions about
1.Induction Machines(mainly)
2.Transformers
3.Synchronous machines
4.Dc machines(not generally asked)
5.Control of AC & DC machines
| Is This Answer Correct ? | 7 Yes | 1 No |
Post New Answer View All Answers
How much load can be taken for chiller from 1500 kva transformer
WHAT IS MEANING OF Gg & Gg IN hrc FUSE
what is the id1 & id2 setting in differential protection relay of CSPC?
What is I to C?
Working of microwave oven?
a)In a 3-phase 4-wire circuit, a circuit breaker is selected to protect the circuit whose highest fault level is 6.6 MVA. Determine the required minimum breaking capacity in kA. (Note: Covert 3-phase power in terms of kA to find answer.) b)Using the below, determine the required minimum making capacity in kA as a “peak value”. Rate breaking capacity (Icn) ka: Icn<= 1.5 Factor = 1.41 1.5
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
how test transfomer(3 phase75kva) by megger
explain working principle of earth leakage relay
how to calulate short circuit current for the following: 1.cable connecting 11KV of 22KV/11KV transformer to 11Kv of 11KV/415V transformer 2.what cable size should i use.
how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING)IO (current operating)?
A 50Hz,4-pole,3-phase,star-connected synchronous motor has a synchronous reactance of 12ohmsper phase and negligible armature resistances.the excitation is such as to give an open-circuit voltage of 13.2kilovolt.the motor is connected to 115kilovolt, 50hertz supplying. what maximum load can be the motor torque,line current and power factor?
How cable from Kit-Kat to main switch, from starter to motor are designed?
quantizer means?
i wasted one year for the job after completed my btech what can i say about 1year time in interview
