what diffrence b/w plc s7200,300,400
- 1 Answers
- 2167 Views
- IFFCO, Reliance, I also Faced
- E-Mail Answers
Answer Posted / Prabhat Yadav
Siemens S7 PLCs (Programmable Logic Controllers) come in various models with different capabilities and features. The S7-300 series is designed for simple control applications, while the S7-400 series offers more advanced functionality such as communication via Ethernet and a larger memory capacity. The S7-200 series may not exist in the same context; it could be a typo or reference to an older generation of Siemens PLCs.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
plz send me general of ongc
Question on maha cement
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
please tell no. & add. of consultancy who recruit me in power plant as instrumen engg. present i m working in power plant as ass.t instrument engg. thanku mahesh 09226562826
Can any one tell me what type of question asked for instrumentation and control interview panel??? pls mail ramashankar.goel@gmail.com
DEAR SIR/MADAM MY NAME IS ARKAPROVA BHATTACHARYYA.I AM A FRESHER INSTRUMENTATION ENGINEER.CAN YOU PLEASE SEND SOME QUESTION PAPERS OF GRADUATE ENGINEER TRAINEE EXAM OF DVC(DAMODAR VALLY CORPORATION).MY EMAIL IDs ARE arka_aec@rediffmail.com.
Can any body help to get Rsemulator 5000 free from internet if possible then give me any link or any help .
please any body have most important data for study for saudi aramco test of instrument QC thanks email shahnaveedullah@gmail.com
pls suggest suitable MOC of diaphragm for pressure measurement of UREA grade solution service fluid.
hello can yoy pls send me previous papers of jindalpower and steel ltd.....'m from instrumentation..... mani1048@gmail.com
Can any one send me IOCL instrumentation question papers.. i dont know the pattern of the questions and what to prepare can any one help me on this .. my email id is anwarnishil@gmail.com
any body who gone thru recent iocl interview.INSTRUMENTATION questions. I need.
What is the Working principle of Dozing valve?
give me all the details about the interview and which type of question being asked
any body please send me the old question papers of ongc test.
