Lux meter is the measuring device to measure the lux level
of lighting fixture. in industrial sector two types of
lighting fixture is being used as street lighting purpose
1. HPSV (Sodium) and 2. HPMV (Mercury).
HPMV having white light which is an combination of red,
blue and yellow colour, while HPSV haivng Yellow lighting.
in HPSV red & blue colour will be absent.
during measurement of the lux level of HPSV and HPMV
fixture.
1. Lux meter can measure the actual lux level of both
fixture?
2. or it will show false reading for HPSV fixture light as
it has only yellow light present.
please give me answer
- 1 Answers
- 4748 Views
- Ace Info, I also Faced
- E-Mail Answers
Answer Posted / Satya Narayan Kumar
1. Yes, a lux meter can measure the actual lux level of both types of fixtures, HPSV (Sodium) and HPMV (Mercury). The lux meter measures the luminous flux received from all visible wavelengths, including red, blue, and yellow, so it will accurately measure the light output of both fixtures.nn2. No, a lux meter does not show false readings for HPSV (Sodium) fixture light just because it has only yellow light present. As I mentioned earlier, the lux meter measures luminous flux from all visible wavelengths, so it can accurately measure the yellow light produced by HPSV fixtures.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
sir i m preparing for BARC but i am not getting any papers to prepare for this exam so please send me some sample papers to my i.d for the preparation of barc.
this site is owned by an nonsense
What is the Working principle of Dozing valve?
hi i am eswar i want to know the instrumentation interview questations for eil(engineers india ltd) i have applied for engineer post in eil please help in this.my mail id eswar310@gmail.com
any one can send me instrumentation previous interview papers? I prepare for MNC Company Interviews? my mail id- Rakesh.Golla@dodsaldxb.ae , and another mail rakesh.gvk@gmail.com
Sir,I am going to sit for IOCL written test exam. recently.Can anyone tell me the name of 'Objective type Question Book on Instrumentation Engineering ' which will help me. Pl. mail to bidyut_71@rediffmail.com / bidyut.saha2008@indiatimes.com / bidyut.saha09@yahoo.in
pls suggest suitable MOC of diaphragm for pressure measurement of UREA grade solution service fluid.
Can any body help to get Rsemulator 5000 free from internet if possible then give me any link or any help .
I WANT SECURITY PAPER MILL, HOSHANGABAD TEST PAPER.KINDLY SEND TO MY MAIL ID
Question on maha cement
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
sir, give me placement papers and interview quistion of birla group company of copper.
What are the key features of a Distributed Control System? describing the various layers (sensor through to business system interfaces) as well as the hardware, software and security aspects of the DCS.
use of split range ? where it is used ? in which control loop it is used ?
sir, i preparing hpcl,ongc,barc,hal exams(instrumentation engg)pls send a placement papers
