we have two motors 1250kW,6.6kV to be coupled
on the same shaft ,so please provide assistance for their
synchronisation.
- 1 Answers
- 2153 Views
- I also Faced
- E-Mail Answers
Answer Posted / Nikhilesh Kumar Kashyap
Synchronization of two motors on the same shaft involves matching the rotation speeds and phases. Here are the general steps for synchronizing two induction motors:
1. Measure and record the rotational speed (RPM) and phase sequence of each motor separately.
2. Adjust the voltage or frequency of one motor to match the RPM of the other motor as closely as possible.
3. Connect both motors in parallel, ensuring that the phase connections are properly aligned.
4. Start both motors and monitor their operation to ensure they are running smoothly and in sync. If necessary, adjust the voltage or frequency again to fine-tune the synchronization.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
1- XC and the RC time constant are both measures of the reaction of C to a change in ____? 2-The power factor is a numerical ratio with a value between 0 and 1 equal to the ______________ of the phase angle. 3-When V and I are out of phase because of reactance, the product of V times I is called ______________ power 4-For _____________ inductors, the branch currents can be added algebraically. 5- The ______________ power in watts can be calculated as I^2R 6-Calculate XL with L = 30mH and f = 1kHz ( I have Xl=2piFL 2*3.141592653*1kHz*30mH =188 ohms Please check) 7-A parallel RL circuit has the values, R = 5kohms, XL = 5kohms. A voltage source of Vt = 10Vrms is connected in parallel to R and L. Determine the total current, It delivered by the voltage source Vt. 8-A series RC circuit has R = 1Mohm and C = 1microF. How long would it take for the capacitor to fully discharge if it is initially fully charged? 9-A circuit has real power = 300W and an apparent power of 500VA. Determine the power factor and phase angle. 10-The time constant for an LR series circuit is T = 0.1s and R = 10ohms. Calculate the inductance L.
sir i want previous entrance exam papers for written test
PLEASE ANYBODY HAVE ELECTRICAL CIRCUIT DIAGRAM FOR CHMER PULSE CD 60M SPARKING MACHINE.PLEASE MAIL ME SUPRIYAAYYAPPAN@YAHOO.CO.IN.
please send me the previous year's question papers of jindal GET exams
send me any model test paper of clerical post of state bank of india.......
what is the minimum pay scale for electrical engineer (building construction)in kuwait? plz revert back with yrs of experience & pay scale respectively.
I HAVE BEEN SELECTED FOR APGENCO A.E(ELECTRICAL) 2008.HOW MUCH WEIGHTAGE FOR INTERVIEW AND WRITTEN TEST.HOW I HAVE TO PREPARE. PLEASE GIVE INFORMATION IF U KNOW.WHAT ABT G.D THIS TIME.CALL RATIO 1:2
hi frds, i m electrical engineer.can i get cdr for electrical engineer if u have then send me on my mail id its jayesh_ee88@yahoo.com.please help me frds
I NEED RRB SYLABUS FOR JE ELECTRICAL ,PLEASE SEND TO MY E- MAIL ID joo28_eee@yahoo.co.in
Draw a SLD of DG distribution up to main LT panel?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
how many stairs have you climbed while you were coming
what is a reactive power? what is the relation with power factor?
i want bhel placement paper for electrical if anybody having pl send to my id kavitha867@myway.com immediately
Please nybody say, weather the result of Bharat Oman is declared or not? Probable date of declare???????
