how to do cementicious paint for rcc walls of cw pump house
- 1 Answers
- 2109 Views
- APGenco, I also Faced
- E-Mail Answers
Answer Posted / Avnesh Kumar Gupta
To apply cementitious paint on RCC (Reinforced Cement Concrete) walls of a CW pump house, follow these general steps: 1. Prepare the surface by cleaning it thoroughly and making any necessary repairs. 2. Prime the surface with an appropriate primer to ensure proper adhesion. 3. Apply the cementitious paint using a brush, roller, or spray gun. Ensure that the paint is applied evenly and smoothly. 4. Allow the first coat to dry before applying additional coats if necessary. 5. Seal the painted surface with a suitable sealer to protect it from moisture and weathering.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
HOw much % of premium on DSR-2013 currently
Technical Question of Civil Engineering
minimum number of bars in a beam? minimum and maximum column size and beam size ? minimum and maximum aggregate size used in multistorey residential building for columns,beams,slabs?
please send me bhel questions on rupesh.017@rediffmail.com
Suggest how many column, beem, etc required for 30 mtrs x 21 mtrs width x 8mtrs height for industrial shed of ground floor. I want to know the quantity of tmt steel consumption and Concrete consumption for budgeting
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?
Re: Can anybody help me by attaching files , formats for quality checks of common building materials like cement , concrete , bricks , sand and aggregates? please my email id is smgujjal@gmail.com
material used for mendrel use to bend epoxy coated rebar
I HAVE APPLIED FOR 20TH UES ARMY. I WANTED TO KNOW WHEN WILL I RECEIVE CALL LETTER FOR THE SAME.
hi, i am appearing in HPCL(CIVIL ENGG.)exam. plz send me placement paper of this exam if u are having
hii.plz send me hpcl placement papers for officers trainees for graduate engg plz my email id is ajm_knit@yahoo.com
Anyone have sample questions for bhel interview.please send me as Iam appearing for the interview on 19th sep2008. Kindly send this to my e-mail: arun_prasath_n@yahoo.co.in
how to decide the mortar ratio 1:4,1:6 in masonry? same in plaster 1:3 and 1:4? which code or any document reference taken to define proportion?
What is the strength of 1:6:12 mix?
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
