Interested to Buy Any Domain ? << Click Here >> for more details...
As per IS 456 2000 Clause 16, table 11, page no. 30, it is
written that acceptance strength of concrete is fck+4 for
grade above M20. what is the meaning of " Mean of the group
of 4 Non- overlapping consecutive test results"
- 1 Answers
- 6645 Views
- Ashiana Housing, I also Faced
- E-Mail Answers
Answer Posted / sita rama raju
Average of 4 consecutive and different test samples (1 sample = 3 cubes).
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
Calculate the maximum allowable speed on a horizontal curve of radius 350m if the maximum allowable values of the lateral coefficient of friction are 0.14 and the rate of superelevation is 0.08.
What is GSB gradation
How to decide/consider the grade of bitumen for dbm.
Define current ucs?
A Cat excavator loader of 3Lm*3 heaped capacity bucket is to be used to load blasted rock directly into a crusher of capacity (consumption) of 100L
The foundations are placed below ground level, to increase?
Thumb rule for steel qty for 1m2 in kg/m2 column slab footing beam
As per Kandal suggestions, we have implemented rolling starts on 140 (+/- 5) degrees and we kept 3 rollars to complete the rolling before falling 125 degrees and the Aggregate AIV is below 22. But When the DBM bed is being rolled 3rd high viabration, (Before 1 plain & low ,2 high Viabrations), the aggregate is getting sharp edge agg. projections are damaged. As the literature is said that, the VG-30 Grade having better control the temp. susceptibility than Penetration grade. if so we could not get this problem at site. But we are facing on site. let me know.
What are the Types Of DPC and its Thickness used?
How to Calculate Materials Required for PCC 1:4:8 for 1Cum & Brickwork 1:4 for 1Cum & Plastering 1:4 (15mm Thick) for 100Sqm & RCC 1:4:8 & 2mt ( L1=1mt & L2=1mt ) length of 12mm Steel bended in 90degrees what is the formula to calculate Weight & Actual Length ?
explain fie benefits of using standard terminology in the measurement process
RR masonry rate analysis
how can i calculate cement in brickwork
what is the amount of absorption of slurry in shuttering ply board. what is the amount of slurry leakage allowed for 1 m3 of concrete.
What is the difference between shear and tensile strength?
