Interested to Buy Any Domain ? << Click Here >> for more details...
what is the difference between OSR and BUCHHOLZ relay of transformer?
- 1 Answers
- 9157 Views
- Bhushan Power Steel, I also Faced
- E-Mail Answers
Answer Posted / sanskar
Difference between Buchholz Relay and Oil Surge Realy:
Generally there is confusion between operation of Buchholz relay and Oil surge relay.
So, Let me interpret the major differences between them.
Buchholz Relay
Oil Surge Realy
Buchholz relay is used for protection of oil filled transformers/reactors fitted with conservators against low oil level and internal faults.
OSR is used to report any malfunction developed inside the On Load Tap Changer Chamber.
Buchholz relay is Gas actuated Relay.
OSR is Oil actuated Relay.
Buchholz relay should be mounted in the connecting pipe between the transformer and conservator tank.
OSR is installed in the pipe between OLTC head and the oil conservator.
Buchholz relay is actuated by the gases flowing through and accumulated in relay.
OSR relay is actuated when the flow rate of oil exceeds the preset value.
Buchholz relay detects the fall in oil level due to formation of gases after any internal fault inside the transformer.
OSR detects excessive oil surge after any fault occurs inside OLTC Chamber.
| Is This Answer Correct ? | 4 Yes | 1 No |
Post New Answer View All Answers
how to calculate the capacitor to maintain power factor?
what is earth fault relay 64T, why it is used in main Incomer and neutral CT of Transformer.
if the armature current in a dc generator is ac ( sinusoidal ) why doesnt the sjhape af armature mmf a sinusoidal (ni) ? armature mmf in case of a dc machine is triangular.
Whether the vacuum contactor requires Short circuit protection?If No,why?
what is difference between line differential and transformer differential?
What is meant by system?
Whether should be the oil level in OCTC transfomer? It should be upto winding immersed completely or should be upto tap changer s/w? How it will affect the performance of the transformer. Rating may be 33KVA
how to carried out tan delta test in 11 KV alternator ?
Define pole pitch?
Dear all, I just want to ask an expert on this forum for some insights. For the magnetic balance test, when applied voltage on a Delta-Star transformer e.g. Dyn11, the following relationships apply for HV side: 1. H1-H2 = H2-H3 H3-H1 2. H2-H3 = H3-H1 H1-H2 3. H3-H1 = H1-H2 H2-H3 For the LV side also: 4. X1-X0 = X2-X0 X3-X0 5. X2-X0 = X3-X0 X1-X0 6. X3-X0 = X1-X0 X2-X0 Is there a similar pattern for Y-d, Y-Y, D-d? And how about Y-z, D-z, Z-y transformers? I've tested a YNzn5 transformer and for LV side I don't see the pattern. In this particular case I got for LV side the following (see values below): H1-H0 H2-H0 H3-H0 X0-X1 X0-X2 X0-X3 128.0 119.9 7.2 29.2 13.3 15.8 70.7 128.4 59.2 23.4 22.0 3.6 7.2 120.1 128.1 13.4 29.3 15.8 What is the relationship here for LV? For row 1 I see the relationship, for row 3 I also see but it's shifted, but for row 2 I don't see such relationship. Any suggestions, answers, someone?
define as synchronous generator
draw the restricted earth fault protection circuit install on power transformer and identify its parameters and draw C/C curve of it
what curve and rateing would you use for a three phase 0.75kw motor?
l&t switch FN 63 handle position can we change
ELECTRICAL DRIVES: can a motor load system with passive load torque can have equilibrium speed in second quadrant
