Answer Posted / deepak singh
0 to 1000v low voltage
1000 to 35kv medium voltage
35kv to 220kv high voltage
220 to 720 kv extra high voltage
above 720kv (maily dc supply) ultra high voltage
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
What is the best thing to protect the motor from running over full current. CT or O/L or pressure transducer at the given pressure rating
how we start 40w tube light with 4 diodes,2capacitors,1 choke and without starter.(a product avilable in market which lights burnt tube lights also)
How to check the Bushings of the transformer?
What do you mean by Stimulastion Test in Diesel Genarator / Why & when it's conducted ?
whats the differece between Exd and Exe
write circuit diagram for a motor rotate in forward direction once it started and when pressed the same button it should rotate in anticlockwise.
why you don not show protection and type of isolation in key single line diagram?
what are the factors to be considered while design the breaker either HT or LT??
can anybody send me syllabus of rrb section engg (electrical). and also send previous question pepar...
at what rate the micro controller increment its timer....is it 1micro seconds or 1/(12*10^6) seconds
which network topology offers the greatest level of tolerance?
During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.
derive DC RMS value for half wave rectifier?
how to calculate the earth mat design in 132 kv substation yard ????
LET ME NOW MORE ABOUT icu and ics for circuit breaker. how we calculate the rating of circuit breaker and i c u and ics values
