Interested to Buy Any Domain ? << Click Here >> for more details...
How to calculate water tank capacity in Ltr
- 3 Answers
- 5085 Views
- Bohra Industries Limited, I also Faced
- E-Mail Answers
Answer Posted / sohan
Calculate the volume of storage L×B×H
Than multiply with 1000
The quantity of water come in letters
| Is This Answer Correct ? | 8 Yes | 0 No |
Post New Answer View All Answers
As per Kandal suggestions, we have implemented rolling starts on 140 (+/- 5) degrees and we kept 3 rollars to complete the rolling before falling 125 degrees and the Aggregate AIV is below 22. But When the DBM bed is being rolled 3rd high viabration, (Before 1 plain & low ,2 high Viabrations), the aggregate is getting sharp edge agg. projections are damaged. As the literature is said that, the VG-30 Grade having better control the temp. susceptibility than Penetration grade. if so we could not get this problem at site. But we are facing on site. let me know.
How to calculate the cement and fine aggregate requirement for solid block masonry works in terms of Sqm. 1. 400x200x200mm 2. 400x200x100mm 3. 600x200x100mm 4. 600x200x200mm I need the answer for 1 Sqm of solid block works.
What is costing in 100squre feet bricks
Define current ucs?
how to decide the mortar ratio 1:4,1:6 in masonry? same in plaster 1:3 and 1:4? which code or any document reference taken to define proportion?
WET BULB TEMPERATURE AND DRY BULB TEMPERATURE?
how much quantity of cement,sand and water required for 1 sq feet flooring work .
Explain the latest method to detect a crack in a building?
Define What is diversion tunnel in a dam?
Describe the role of independent Quantity surveyor?
1.what type of the rock is most suitable for wet mix macadam in construction of road? 2.what is the highest maximum dry density and optimum moisture content can be acheive by using most suitable crush rock?
On what basis we decide the formation level of the road? other then that of 50% Cutting and 50% Filling??
Detection of a beam & a girder are––––
a butt weld is specified by
factory shed foundation l=4, b=3' d=8' rcc foudation for top to bottom pl tell me cement ,steel ,sand ,labour cost ,excavtion,soil is weak not so hard
