what are the differences between Tie beam, Ground beam and strap beam.
thanks
Answer Posted / sanjeev sah
strap beam :- In cantilever foundation design two separate footings are interconnected by a reinforced concrete beam that is very stiff AND IS NOT SUPPORTED BY THE UNDERLYING SOIL! The purpose of the design is to force the soil reaction to be concentrated at a specific point.
tie beam :- Building) a horizontal beam that serves to prevent two other structural members from separating, esp one that connects two corresponding rafters in a roof or roof truss
Ground beam :- In a framed structure, the sill which is nearest the ground or on the ground; used to distribute concentrated loads.
Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
how much tempareture are required to make liquid state of pid leed
How to calculate woden area in sft and Cft
what is the type of earthing
can i make bricks using M10 grade concrete ? and what would be the cost of a brick if we use m10 grade concrete sand and aggregates ??
What are the uses of alloys in daily life and how are alloys made?
List out some of the software used in the construction sector to estimate cost and monitoring expenses?
please what is the number of bars required for a column of 6mx6m and 450mmx300mm,its a commercial building (Church)
Bearing capacity of soil determined as per ASTM is to design the foundation size.what is the importance of EV1/EV2 value as per DIN .My consultant ask me to test the the soil as per din to find out this ratio to assess the compacted strength of soil ,,?? is it meaning full ??
16 questions out of 55 were from the book GUPTA N GUPTA OBJECTIVE of civil engineering. Total ques were 4 ques from hydraullics, 7 from BMC, 4 FROM SOM, 4 from soil mechanics, 6 from transportation, 5 from engineering drawing.
I want to know the relevant IS codes of practice which deals with different testings of cement-sand mortar (nominal mix)that is being normally used for brick work or plaster work in the construction work.
Who designed the city of washington dc?
List out the types of roofs?
IN Compression testing machine 1division =10KN ,then what is compressive strength of 100*100 mm cubes at a load of 320 KN
Wat is meant by Aecron brick?
How about the temperature of grade 35A concrete? Does it depend on the ambient temperature?