Interested to Buy Any Domain ? << Click Here >> for more details...
how to reduce shorting current in a slipring induction motor
- 3 Answers
- 3906 Views
- I also Faced
- E-Mail Answers
Answer Posted / balajikamal84
connect the resistance at the end of rotor ckt or Slip Power Recovery System
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
why the neutral point in connnection oscillates?
(1)Can earth and be conected together (2) what is the diferent between earth & neutral
What facility we get after CT secondary earthing and how?
What is the minimum distance to be maintained in between HT panel and LT panel and Instrument panel as per IEC and NEC standards?
What is the basic principle of operation of alternators/dc generators?
What is the permissable nutral current of three phase system as per IS standards?
what is thresold of perception
What is ramp signal?
Is potential difference materials property ..? if yes tnen how.. explain brifly.
What is relation between mu(nought) and epsilon(nought)?
Determine the BTU size of an aircon for 20 sq metre room
What is the actual meaning of thermal power efficiency ?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
-What should be minimum value of insulation resistance and maximum value of earth resistance at any electrical instillation and what is method of testing the same.
why incomer bay is required before transformer bay if there are more than 1 nos. of transformer bay.
