Interested to Buy Any Domain ? << Click Here >> for more details...
If I want to lab 16 mm dia. bar with 20 mm dia bar with 40D
lap length which dia.should I consider for lapping
- 12 Answers
- 55371 Views
- I also Faced
- E-Mail Answers
Answer Posted / bodhisatwa goswami
The lap should be considered with bar 20mm, i.e 40D = 40*20... and the length of the lap should be provided in the lesser dia 16mm.
| Is This Answer Correct ? | 1 Yes | 2 No |
Post New Answer View All Answers
What are the applications of modulus of elasticity?
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
1) What is meant by C-soil in geotechnical Engineering? 2) What is Eve board? 3) What will happen when heat is applied to cement? 4) what do you understand by the lateral dimention ?
What is the biggest dam in america?
What is the material consumption- cement,sand,tiles etc for Toilet dado?
57. Calculate the volume of a truck loaded with stone chips whose data are as follows– 5 Top Length - 13-9, 13-10, 13-09 Bottom Length - 13-11, 13-10.5, 13-10 Top width - 8-7.5, 8-8, 8-7 Bottom width - 8-7, 8-8, 8-7.5 Depth - 2-0, 1-11.5, 1-10, 1-11, 1 -10.5, 1-11.75, 1-11
what s the standrd size of pvc fittings ,like elbow, bend,tee etc ? please explain with figure ?
What is the thickness of slab for 600 sq each) 2 slab construction. What should be the size of steel rod?
If we are providing concrete joint in every 10m with water stopper in water tank wall then is it necessary to cut the steel at joint section?
where tie beam is used? what is the pupose? what dimension of tie beam can provided and number and diameter of steel bars to be used between the columns of 1333mm and 1400.
Define different types of roof systems?
i have span of 6m x 4m how do i calculate the reinforcement of steel i needed and to at what distance and also the thickness of slab. looking forward thank you RAVI
why is M25 and Fe 500 assumed to be most economical? i feel it is not.This is because higher grade of concrete and steel has higher lapping length and anchorage length compared to lower grades..
when reinforcement binding completed if there is more cover than the required what is the solution to reduce the cover?
explain five benefits of using standard terminology in the measurement process?
