Interested to Buy Any Domain ? << Click Here >> for more details...
what are the types of starter ?
- 25 Answers
- 192829 Views
- Andhra Sugars, Bhel, Eveready, HyFun Foods, Jindal, ME, Valeo Lighting Systems India Private Limited, I also Faced
- E-Mail Answers
Answer Posted / mohammed aslam
Generally we use 4 types of starters in Motor Control Panels/Centers.
They are;
1. DoL-Direct online Starter
2. Start delta
3. Soft starter
4. Variable frequency Drive
| Is This Answer Correct ? | 5 Yes | 2 No |
Post New Answer View All Answers
what will be happen if earth point is being used for as a neutral point for raw power , and same will be used for ups earthing
determine two methods to find loose connection in operational electrical system?
What is core CT & it's function?
234 MVA Generator 3 phase Short circuit current Values required? Gen set Rating-234 MVA, Gen Voltage-18kv, PF;0.8, Xdv:23.5 %, Transformer Rating-18/380KV, 680MVA,Yndd1 two winding, Step up TR, ZT:35.50 %,X/R 4.33 Gen CB Position, CB open ,Disconnected open, Generator Running Voltage 18 Kv, Bi mistakes generator side earth switch Closed during that time short circuit current level in 3 Phase required, and how to test on site 234MVA Generator Short circuit current,
As per standard, transformer body earthing and other Equipment earthing (Equipment earthing) did not connect. but in LT side termination we are doing metal glanding in both side Transformer to PCC Panel through armoured cable, now X'mer body earthing and PCC Pane earthing (Equipment earthing) both are connect.is this safe for X'mer or other equipment?
Can i use the B-curve MCB instead of C-curve MCB
EXPLAIN THE ESSENTIAL FACTORS WHICH INFLUENCES THE CHOICE OF SITE FOR A HYDRO ELECTRIC POWER PLANT
WHAT IS MEANT BY SHEATH VOLTAGE IN 132Kv cable?
if two transformers are placed parallel & both have fault impedance of 50KA will it increase or decrease show example?
what about SAP/MRP regarding manufacturing of electric motors and all drives?
How convergengr of nr method is not dependent on selection of slack bus and how gauss siedel method depends?
I have a drawing of a wound rotor induction motor for a crane. This crane motor has 5 forward speeds & 5 reverse speed implemented of course with different amount of resistance for each speed setting selected. What has got me scratching around is the fact that 8 of the 10 speed selections switch in uneven (unbalanced) amounts of resistances on each of the 3 connections to the motor's rotor.Can this be possible? I would have assumed this would produce unbalanced rotor currents and therefore vibration in the motor. I would greatly appreciate anyone's comments on this. Many thanks, Confused.
What is the gross weight to copper ratio in slip ring induction motor of 4000 HP,6.6 kv, 372amp, 992 rpm GE motor.
how external lighting design? please give examples?
why high speed tripping relay will be used in tripping circuit why not normal relay
