What is the density of Cement, Fly ash,20 mm aggregate, 10
mm aggregate and stone dust?
Answer Posted / s narayana reddy
Cement -1440kg/cum
Drysand -1600kg/cum
Riversand -1850kg/cum
Aggregates(20mm)-1900kg/cum
Aggregates(12mm)-1600kg/cum
| Is This Answer Correct ? | 16 Yes | 13 No |
Post New Answer View All Answers
Draw a neat sketch showing the 'throat' of a welding in a plate girder ?
What is pre-stressed concrete?
20 mpa what is the quantity of cement sand and aggregate in one cubic meter of pcc non rainforcement concreate kindly answer including formaula thanks
Where is the worlds longest elevator and how long is it?
How to calculate sand , cement quantity for 23mm thk brick work(10x10)
1.what type of the rock is most suitable for wet mix macadam in construction of road? 2.what is the highest maximum dry density and optimum moisture content can be acheive by using most suitable crush rock?
HOW MANY BAGS OF CEMEMT USED IN PER M2 OF PARTITION WALL
As we know that steel is a tension member but why we are using STRUCTURE STEEL as a COLUMN (Without concrete) where column is a compression member and compression strength of steel is very low
Design an underground tank of internal dimensions 6m x 3m x 3m. The soil surrounding the tank always remains dry. The tank shall be provided with a roof slab. The soil weighs 16000 N/m3 having an angle of repose of 30.
how many men days of loburs and masons are requirete for 1 cum,pcc (1:2:4),Pcc(1:3:6) and Pcc(1:4:8) thanking you
Where will be the maximum bending moment in a TEE Beam?
what is modular brick and it size
what is right & short method of measurement of slab&beam
Need help in designing a degasser tower for 2m3/hr DM plant, also send me the formulae used
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals