Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / tausif rana
civil engineer is the person who make construction work
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
How much cement and sand are required for 1 square feet of plaster at a thickness of 15 mm at a ratio of 1:4?
1. 1. The mass of a chunk of moist soil is 34 Kg and its volume is 0.012 cu. Meter. After drying in an oven, the mass reduces to 14.25 Kg. Determine the water content, the density of moist soil, the dry density, void ratio, porosity and degree of saturation. Take G = 3.25
Bernaullis theorem deals with the law of conservation of mass momentum energy none
What is the veriplus for ellips card length formula (major axis 3.4m,minar axis 2.6m spacing 0.2m
What is the software used in civil engineering?
What is the quantity of cement used for stone pitching work of 100sqm 225mm thick and cement mortar of 1:6? And how?
How much does the leaning tower of pisa lean?
Define What glue is least sticky?
what is meant by sustainable developement as far construction field is considered. Give suitable examples to explain the same
What is the likely strength of a 1:2:4 concrete mix?
how to decide the mortar ratio 1:4,1:6 in masonry? same in plaster 1:3 and 1:4? which code or any document reference taken to define proportion?
How to fix toll charge for a particular vehicle at toll booths in a highway?
In foundation design, while we do the base pressure check, we normally check if the attained pressure value is less than the GROSS BEARING CAPACITY of the soil which is the sum of net bearing capacity of soil and the overburden pressure. Actually, the overburden pressure acts against the net bearing capacity of the soil and I feel that we are actually increasing the bearing capacity value and doing the check. I feel that this is NOT right. Please clarify on this.
What is the life of anaerobic Digester if it is used for municipal solid waste digetion.
Power grids in two adjacent states(A&B) are interconnected. Can power grid in state A can be represented by Thevenin Equivalent Circuit. If not explain Why?
