Interested to Buy Any Domain ? << Click Here >> for more details...
how to design an isolated footing having load and moment
acting on the column also draw pressure diagram at the base
- 42 Answers
- 48884 Views
- BARC, Fresher, Government, Idea, Technip, I also Faced
- E-Mail Answers
Post New Answer View All Answers
4. Differentiate between NC and OC soils. Draw curves for (i) Stress vs Strain (ii) Volume charge vs Strain (iii) Pore pressure vs Strain for these soils
how to prepare site mix design
I used Etabs software to analyse a high-rise building. And I want to use templated UBC-codes inside to calculate the Seismic load. My question is: whether or not I have to control the seismic load by base shear load which is manual calculation? (just for more clarification: I can control this by input the scale factor into Eartquake definition in Etabs) I would highly appreciate your answer.
What is unit weight of normal concrete?
What is Architect-Prepared Contract?
qty. of cement & sand required (100sq.mtr) for fixing of floor and wall tiles also fixing of marble stone on the floor
what is the difference between tsp & tower
What is construction mitigation management?
What are the disadvantages while using stone dust as filler in pavements?
3. A vane 12.5 cm long, 8.8 cm dia was pressed into a soft clay at the bottom of borehole. Torque was applied and the value at failure was 55 N-m. find the shear strength of the clay on a horizontal plane.
hi guys what happens if you are absent for a supplymentry exam?
What things you need to take care of before building a kitchen island?
what are the code used for residental building?
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
any book or article on pumped concrete.
