Interested to Buy Any Domain ? << Click Here >> for more details...
can a 12v dg starting battery(150 AH) be replace by 6 nos of
200AH batteries each of 2v connected in series.
- 3 Answers
- 5368 Views
- I also Faced
- E-Mail Answers
Answer Posted / gouse
yes dg will start..
| Is This Answer Correct ? | 6 Yes | 0 No |
Post New Answer View All Answers
If we have use two power cable for incomer, that time how many use cbct for earth leakage protection? 1 or 2 if 1 way? If 2 way?
71ohm,111ohm,95ohm,179ohm in calculate the total ohm in series circuit
what is laser diodes?
what are the Alarm, Trip & Safety equipment (Issues) present in Power Transformers pls Mail it to ashokbabunhce@gmail.com
what is the acceptable limit value for Desolve Gas Analysis/
WHAT IS IEC? & WHAT IS BENEFIT TO PRODUCT FROM IEC?
When calculating the speed of a rotor required for a particular frequency of synchronous generator we use the equation 60f/p Is this p is the number of pole pairs of rotor & do we consider the number of pole pairs in the stator is 1?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
The magnitude of sum of two sinusoidal av voltage is equal to 230 volt.the magnitude of each individual voltage is also equal to 230 volt.what must be the phase difference between voltages?
List the time domain specifications.
If the rated speed of a d.c. Shunt motor is1440 r.p.m, which method of speed control would you suggested to obtain a speed of 1500 r.p.m?
Why collecting electrode of ESP to be earthed
Do closed loops systems require manual input?
how to calculate sizing of NGTR (Transformer rating,Loading resistor value and Current rating of resistor) and what is the X/R ratio. Details : 11kV,Capacitance 1.73532 micro farads,40kA for 1sec.
How each of the following losses occur in d.c machines (i) copper (2)core (3) windage (4)friction please help me
