Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / carl_ellis
What kind of feedback is used in DP cells?
In electronic DP transmitters there is no feedback. Field
sensors measure a physical phenomenon but do not use feedback.
Closed loop controllers use feedback (the process variable
reflecting the change in the controller's/final control
element output) and valve positioners use position feedback.
Carl Ellis
Measure First
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
why fuse block is not used for AI signal?
what is dc moter.
How can a d.p. Transmitter be calibrated?
Calculate the maximum pressure drop that can be allowed to occur across a control valve, so that we can prevent cavitation / flashing from occurring. Use the following formula: Δ P allow = Km (P1 – PvapourA) where, Δ P allow - the maximum allowable differential pressure for sizing purposes, or terminal pressure drop; Km- the valve recovery coefficient from the manufacturer’s catalogue; P1 - absolute inlet fluid pressure; PvapourA - absolute fluid vapour pressure at the inlet temperature; Use Atmospheric pressure = 101.3 kPa, P1 = 1200 kPa(g), PvapourA = 4 kPa, KM = 0.72
how to calibrate mass flow meter (Coriolis)? Example calibration range: 0 to 2500 kg/hr line size 3" fluid: Etheline glycol (MEG)
how to calculate the total flow in square root
What is the use of control cable?
How to calibrate Field bus transmitter? procedure ?
Give an example where you had aproblem on the job, and tell me how you solved the problem. and the finalvoutcome.
Emergency Shutdown Systems/ Plant Shutdown System.
Please any one can provide latest aptitude test,technical test and interview questions for tata consulting engineering (TCE) i need it asap thanks in advance
why use 50% lel methane gas concentration for gas detector calibration instead of 60% lel gas concentration whereas the hi alarm set at 60% lel.
What you mean by multi stage control vavles?
Drum level tx with GP4 with zero elevation:7300mmh20 on HP and 8050mmh2o on LP as range but on commissioning the tx readiing is max,Why this reading?
Please tell me details about Sox,Nox,SWAS analyser????
