Interested to Buy Any Domain ? << Click Here >> for more details...
What is difference between PLC and SCADA
- 13 Answers
- 70021 Views
- Uflex, Vimal Fire Controls, I also Faced
- E-Mail Answers
Answer Posted / guna
PLC - Programmable logic controller. Its a hardware, which is directly in contact with field instruments. it works according to the logic written in plc.(EX: like a computer hardware)
SCADA - Supervisory control and data acquisition. Its a software, which shows the out put feed back in visual manner, that plc cant do. (EX: like a computer screen)
| Is This Answer Correct ? | 18 Yes | 4 No |
Post New Answer View All Answers
the problem faced on star or delta winding connection??
I have c license but I don't know eligibility of Max Kilo Volts under the electrical licensing board.
what is the benefit of floating our DC source? if i have two floating DC source of which 1 has a ref voltage of -21VDC and the other of -18VDC. can it be connected in parallel to share a common ref voltage? if not, how do i make both sources to be of common ref voltage? tks
Why can't we take NO LOAD TRIAL of motors having V1 mounting??
Leakage current,un balance current which relay using for high voltage transmission?
what is the Connected Load (kW) or Contract Demand (kVA)of mahindra nasik plant??
A 230V dc shunt wound motor has an armature resistance of 0,15Ω.When operating on no load at 650 rev/min the armature current is 6A . The motor takes a full load current of 85A. Calculate the full load speed if the field flux is (i) maintained constant (ii)reduced by 0,03
what curve and rateing would you use for a three phase 0.75kw motor?
Why does the radius of armature is less than the radius of pole shoe?
why the NGR (neutral grounding resistor) always OFF during DG off?
If any HVDC line is going with positive & negative(the negative usually have return path of current with earthing electrode). Now the question is if this HVDC earthed electrode which is using as return path and earthed any nearby 400kv or 220kv AC substation equipments. which will be the impact of this on AC substation & its equipment, how severe may be this and what should be the minimum distance require between HVDC earthed electrode and AC substation equipments? It's really an high engineering level question...Dare to answer and increase your knowledge.
What is meant by RVT and NDR ? expansion and details of it
Is there any type of starter for DC motor other than two point,Three point and Four point starters?
What are the symptoms of a bad PG card of a drive (inverter) esp. of Yaskawa Ac Drives (inverters) G7 ?
Is any generator is developed which is operated with out diesal or other expensive source?
