Interested to Buy Any Domain ? << Click Here >> for more details...
what is the bus bar size of 2700 amp ACB breaker ? and what is
the cable size ?pls detailed answer ?
- 3 Answers
- 6690 Views
- I also Faced
- E-Mail Answers
Answer Posted / kshirod dash
cable size should be 6*600 sqmm aluminium armed cable 3.5 core
so that it will stand 2700 amp current
| Is This Answer Correct ? | 4 Yes | 2 No |
Post New Answer View All Answers
what is subtransient , transient and steady stateac components
what is the meaning of vcc
How to derive detailed design of Suitable bus Bar for 100A for 6.6KV?
WHAT IS THE TOTAL POWER GENERATION IN CHHATTISGARH?
What is the gross weight to copper ratio in slip ring induction motor of 4000 HP,6.6 kv, 372amp, 992 rpm GE motor.
Tell me the reason of connecting domestic t/f primary in star or delta,and also secondary side.
Why the magneti fields are not passes from southpole to north pole
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
i need list of swg(standard wire guage) or area of conductor v/s current carrying capacity of conductor copper & alluminium...
what is the value of combined earthing in general electrical circiut?
what happen ehen synchronisation is done at below rated speed
how to calculate differential current when we testing differential relay..suppose we have 1000kw generator,630amp VCB,what value we should put /inject so that relay trip the VCB? PLLZ justify ur comment
there is an alternator 480 k.w, 400v,50hz, 4-wire running on load having leakage alternator body earthed current 38 A. is it within acceptable limit? if yes then give reference if no then how to bring within specified limit
diff. between tension mode & speed mode
IF TVM OF TRANSFORMER SHOWS POWER FACTOR ON 33 KV SIDE AS 0.97 LAGGING AND ON 132 KV SIDE IS 0.75 LEADING.IS THIS CORRECT.WHERE IS PROBLEM.
