Interested to Buy Any Domain ? << Click Here >> for more details...
i seen a 132kv/11kv transformer,and thier is a sugar
factorys
10MW EXPORT PLANT,MY QUESTION IS THAT
WHEN THEY EXPORT ELECTRICITY THEY USE THE SAME TRANSFORMER
AND THE CONNECT IT TO 132/11KV TRANSFORMERS SECONDARY SIDE
CAN ANY ONE EXPLAIN IT..
THE TRANSFORMER IS OF KIRLOSKAR MAKE
AND IT HAS TAP CHANGER.
- 1 Answers
- 3166 Views
- I also Faced
- E-Mail Answers
Answer Posted / s.sarkar
Your information is incomplete, However,When the plant
produce energy,exporting power to the 132 KV grid by
generating by any means at a voltage level of 11KV.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
from generating station If 400v LT line length is 1000m how much voltage is drop and how do i calculate it? which cable will be use for this line?
Why PT voltages are measured with respect to ground? What do u mean by voltage or current polarized.
how withstand of hi-pot test outputs of transformer wire 2.5mm
Is it acceptable of installing an earth pit in planters area where bare copper cable, earth rod and connection are susceptible to corrosion due to water?
Which test will be more severe for VCB?
WHAT IS SITTING AMPS IN OVER-LOAD RELAY FOR 1PH OR 3PH MOTORS?IF ITS NAME PLATE GIVEN MAX AMPS 10AMPS?
How many size of cable required for a 300m long and 30kw inductive lode
what things to be considered when designing UPS
What is the best thing to protect the motor from running over full current. CT or O/L or pressure transducer at the given pressure rating
what are symmetrical and non symmetrical components in electrical installation.
USE OF 8 WAY PAN ASSEMBLY
advantage of motor design on higher power factor . normally motors are designed for .8 power factor. what is advantage of designing at .88 power factor
In what cases (circumstances)we should apply P controller, PD controller, PI controller & PID controller ?
how many synchronous motor are there in any power plant
what is invertor supply and raw powersupply
