Interested to Buy Any Domain ? << Click Here >> for more details...
when we change tha taps from 1-16 in 100mva tr whether a
constant voltage avaliable till it reaches tap 16 or voltage
change as per taps change
- 1 Answers
- 3411 Views
- I also Faced
- E-Mail Answers
Answer Posted / samson peter
voltage will change for every tap change
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
is there any phase difference occurs while primary and secondary side mutual induction occurs?
what is the difference between dry and wet type of 132kV terminations. which one is durable
how choose conductor&depending upon load
What is knee point voltage?
Why does the Solid state Rectifiers for 3-ph brake motors sometimes have 2 & sometimes 3 output terminals?
What is the difference between the impedance percent and impedance voltage ?
Hi guys! Plz help me to answer the following questions. 1. What are the types of transmission line energy losses? 2. Why are the VLF are used some types of services? 3. What frequencies are used for reliable beyond the horizon terrestrial communication without repeaters? 4. To permit selection of 1 out 16 equi-probable, what is the number of bitis required? 5. What is the most common modulation used for telegraphy? 6. What is the multiplexing is used to increase the capacity of the optic fiber? Thanks
What are operating procudures & Safety precautions to be observed while operating OLTC in manual mode ?
What is lifting power for 1 wb/m2 and 1 A magnet?
why the rotor current becomes in steady state during high slip region? please verify with equations.
Can any one give an explanation about rating factors of cable? if we are laying the cable on the air with an temp 15 degree then rating factors will be 1.15 and if we are laying the cable on the air an temp 60 degree then rating factor will be 0.76 please describe it and what is the difference between rating factor and derating factor?
why +24 v and -48 v give to BTS? If -48v protect from surge then why we not use -24 v?
What is power distribution criteria for converting single phase unbalanced residential load to 3 phase star connected balance system. Does total KW converted to 3 Phase. Means Divided by root 3.
is it possible to turn on the single phase star delta on delay timer using 24 v dc ?
What are the commonly used schemes for the bus zone protection?
