Answer Posted / som
A turbo generator is the combination of a turbine directly connected to an electric generator for the generation of electric power.Also Smaller turbo-generators with gas turbines are often used as auxiliary power units. For base loads diesel generators are usually preferred, since they offer better fuel efficiency.
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
what is basic difference betmeen normal & flame proof motor??
How vfd saving power.
In radial network the source is fed from 1 end both ends at central
what will happens if one phase is missing for 33/11kv power transfomer and why?
for what voltage will reactive power be largest in 380 kv line : a) 375kv b)380kv c)385kv
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
How the capacitance og capacitor volatage transformer is decided?
what is the function of capacitor duty contactor in an capacitor panel???
What is the difference between grid and off- grid system??
why the electrolyte level in lead acid battery is maintained 2.5 cms above electrodes?
how circuit breaker work.. what is the operations taking place inside a circuit breaker when an overcurrent occurs... is it similar to fuse?
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
How can we select suitable capacity generator for three phase load (inductive load) and how to take study analysis in 3 three phase load system ?
What are the limitations of Kirchoff's laws?
What is maximum power transfer theorem?