A 11000/415V distribution transformer is fed 415V upon it's LT
side,Do I get 11000V upon it's Primary side ?
Answer Posted / uselescrapytwit
Yes because the losses are allowed for via the % in the regulations. ALSo the transformer may be a multi tap to allow adjustment of secondary out put.
All in all its close enough to satisfy the regulation primary secondary either way round.
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
What is the rate of WCT on the Electrical Contracts comprising of DG Sets and Civil Works in Delhi ?
Why temperature rise is conducted in bus bars and isolators?
what are the types of electromagnetic forces developed in practical transformer?
Battery is a voltage source? give one example of current source and why?
How can we find out LT UG cable fault (size,from-4*25mm sqr to 4*300mm sqr)? How mani types UG cable faults?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
what is a pulse transformer? how rise time of pulse changes when ever the voltage changes?
what is there inside an inverter and how it works?
how to discharge 3 phase power factor correction capacitors
If one tertiary phase i.e. R,Y or B is earthed of a loaded type tertiary delta connected (Without load)of a power auto transformer, what is its advantage/disadvantage?
explain the types of drives
Why neutral point is consider as zero potential?
I have c license but I don't know eligibility of Max Kilo Volts under the electrical licensing board.
What are the disadvantages of autotransformer?
Keywords: Die, Card, Coin, B/N 2 To 12