Interested to Buy Any Domain ? << Click Here >> for more details...
what happen if we give square wave instead of sine wave to
the transformer
- 8 Answers
- 12954 Views
- I also Faced
- E-Mail Answers
Answer Posted / akshay kumar
We get square wave
on secondry side of T/
F
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
What are two contours of nichols chart?
what are the accessories need to be added while doing estimation for the following: 1.MCCB 2.MCB 3.ACB
What is the difference between circuit breaker and isolator
what is the safe meggar values for motor, transformer HT, LT and Cables? IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace. why we generally use 3.5 core cable or in other word 1/2 core for neutral and also confirm me that in balance conditiob(3 phase)current in neutral will zero
can i able to get bhel previous exam question paper?
In case of salient pole alternator when number of poles are 4 or more than 4 it helps the flux wave to be sinusoid as air gap length is increased from center to tip , but if the number of poles are 2 how does the flux wave is sinusoidal?
A 50Hz,4-pole,3-phase,star-connected synchronous motor has a synchronous reactance of 12ohmsper phase and negligible armature resistances.the excitation is such as to give an open-circuit voltage of 13.2kilovolt.the motor is connected to 115kilovolt, 50hertz supplying. what maximum load can be the motor torque,line current and power factor?
Why in 6 KV XLPE cable termination kit used and why not in 380 V xlpe cable same is not used
IF HT CAPACITOR IN ON POSITION IS THERE ANY LOSSES I.S I SQURE OCCURS IN THE SYSTEM
hey guys help me out.....what are the industrial uses/functions of nozzles in industries
generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...
why can we use cosine wave instead of sine in ac supply as both have same rms vale and ripple factor
what is the difference between rectifier and converter and commudator?
what is the role and fuction of automatic transfer switch in rotary ups
i have completed deee and i've (June2012-feb 2015 experience in electrical maintenance in pvt ltd company.company having HT & LT electrical power.how to apply electrical C-license ,NOW I was resigned my job,what are requirements of applying for c-license
