Interested to Buy Any Domain ? << Click Here >> for more details...
Are Coils of Electromagnetic flowmeter in direct contact
with fluid material
- 4 Answers
- 8160 Views
- TATA, I also Faced
- E-Mail Answers
Answer Posted / jigar anadkat
Now a days, both types of flow-meters are available. In earlier days, the electrodes were in direct contact with the fluid being measured. Then after retrofit design has been developed in which electrode assembly can be replaced and it is isolated from the process fluid.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
How to find out the current of two motors having same power consumption but different RPM?
Name different parts of a pressure gauge.
Somebody tell me in what way i need to prepare for csio pgrpe(adv instrum eng)interview?what all the quest can i expect?
what is the diffrence between pressure safety valve & pressure relief valve....pls
Why thermo wells are used? What materials are used in thermo wells?
How to Calibrate Vibration Probe (Axial, Redial) in field
what should he know if he is an assitent engineer instrumentation in cement industries of experience of 10 - 15 year.
What is the working principle of the magnetic meter?
How RAL(Rotary air lock)works in cement industry?
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
Emergency Shutdown Systems/ Plant Shutdown System.
how to work static pressure sensore how to work dpt
1. For Steam drum level signal, why do we compensate with drum pressure signal? 2.For main steam Flow signal is comensated with main steam temperature signal and main steam pressure signal why?
How would you choose differential range?
What is the diffrence between ff tx and non ff tx
