Interested to Buy Any Domain ? << Click Here >> for more details...
how to calculate MMWC values in to Tonns(MMWC values
showing in DP transmitter and Tonns value showing in
Totalizer). please tell me details?
- 2 Answers
- 38396 Views
- Chemin C I, MSP, I also Faced
- E-Mail Answers
Answer Posted / jithin
Q=K.Sq.root of D.P [MMWC]
CONVERT VOL FLOW TO MASS FLOW ie Kg/hr
then Kg/hr to t/h
t/h to t/s
then integrate to T
| Is This Answer Correct ? | 22 Yes | 5 No |
Post New Answer View All Answers
Calculate the maximum pressure drop that can be allowed to occur across a control valve, so that we can prevent cavitation / flashing from occurring. Use the following formula: Δ P allow = Km (P1 – PvapourA) where, Δ P allow - the maximum allowable differential pressure for sizing purposes, or terminal pressure drop; Km- the valve recovery coefficient from the manufacturer’s catalogue; P1 - absolute inlet fluid pressure; PvapourA - absolute fluid vapour pressure at the inlet temperature; Use Atmospheric pressure = 101.3 kPa, P1 = 1200 kPa(g), PvapourA = 4 kPa, KM = 0.72
I was working on calibrating turbidity transmitters endress+hauser at effluent polishing plant.We calibrated using NTU buffers.What happened is that when we immersed the sensor, everytime we raise and lower the sensor gradually, the reading will vary.my question is that is there any specifications on what is the required distance from the bottom of the container with buffer to the face of the sensor?Is it ok to install the sensor in a medium which has turbulence specially if bubbles are present?
what is a vortex flow meter,mass flow meter and electromagnetic flow meter.particular use of this.means in which condition particular meter is used.
What is wet leg condition and why is it used?
What is difference between Ionization heat and bimetallic heat
sir, i preparing hpcl,ongc,barc,hal exams(instrumentation engg)pls send a placement papers
what is temperature compensation?
Derive capacitance to 4-20ma conversion formula / relation in capacitance type pressure sensor?
what is sil (safety integrity level
what is KV and XV valve
can anyone tell me about the basic concepts to consider before to start a PLC panel wiring
1)How many tpes of vibration probe and how many tpyes of vibration. 2)how we can calibrate a vibration probe with tk3 3)what is RMS value in vibration measuring application and how we calculate it.
Instrument QA/Qc what is the project quality plan?conduit inspection RFI. which documents attache with package?
What is exact difference between the panel earthing and system earthing in DCS system. What is the value of resistence.
What is furnace draft control?
