Interested to Buy Any Domain ? << Click Here >> for more details...
How can we save theft of wire after finishing of wiring
work, plz suggest another answer other than security or
supervisor's work?
- 1 Answers
- 3239 Views
- I also Faced
- E-Mail Answers
Answer Posted / pradyumna171
NO, NC coil Contactor and one siren may be used to solve this problem.
| Is This Answer Correct ? | 4 Yes | 0 No |
Post New Answer View All Answers
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
if 2 coil of 1000W connect in series and 200 v is applied across it . then what is the total power of coil when coil have only resistive load .
what is meaning of bus riser
In both 600/1000 V cable and 450/750 V cable, we can supply 415 V. However for distribution, all utilities are using only 600/100 V instead of 450/750 V. What is the reason?
What’s electric traction?
What is the previous name of Cox's Bazar
what precautions to be taken while desigining a LT,HT panel. Eg-LT panel PCC panel with ACB installed. HT panel VCB panel with VCB installed. & what is main diffrence betwn IP54 & IP55 construction of panel.
Why we use mho Relay in long transmission line?
Is MEN and RCD related to each other ?? IF yes then how??
i have 500 amp inductive load of motors ,,,pleas tell me how can i calculate for capacitor bank for improving my power factor to 99 .....calcullations for capacitor bank,,,,
What is pd controller?
what is 400kv doble circuit quadpole tower?
What is milivolt dop test in Busducts? What is its significance & procedure to do the test?
Different STANDARDS (BS, IS, IEC etc) gives different informations on CT specification. How they correspons w r t each other (i.e I mean to say BS provides "knee point voltage" but IS does not, then how can i select CT)
What is the unit audit? if our Max demand is something and we found much more unit then how to improve our max demand?
