Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / deva
2.5 to 3.0kg
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
In a beam,stirrups are placed closely at ends than at centre due to shear.similarly where would ties be closer to each other-at center or at ends in a column and slab.
can you provide a link for manual design of building?
How to find beam R/F cutting length
which software is better for design and analysis of buildings (stadd pro ) or (Etabs)
Why should pumping be not used in case of concreting works?
difference between trapezoidal and pedestal footing and how the load acts on that
how many men days of loburs and masons are requirete for 1 cum,pcc (1:2:4),Pcc(1:3:6) and Pcc(1:4:8) thanking you
what is the tensile strength of 10swg and 8swg gabion wire?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
WHAT GOAL DO YOU HAVE IN YOUR CARRIER?
factory shed foundation l=4, b=3' d=8' rcc foudation for top to bottom pl tell me cement ,steel ,sand ,labour cost ,excavtion,soil is weak not so hard
what is the max. area can we apply the plate load test ?
how we check the thickness and line of ceiling plaster.
What is the Systematic Responsibility Site Engineer? Who are the above and under co-oridinating ? What is office & Site co-ordination of Site Engineer?
how do i remedy a foundatiom that the column bases was cast and aftet 28days crushing the conprehensive strength of the concrete fall below the specification 25N/mm2
