Interested to Buy Any Domain ? << Click Here >> for more details...
WHAT IS THE CONDITION FOR OPERATING DIFFERENTIAL RELAY IN
POWER TRANSFORMER & WHERE IS NEUTRAL CT PLACED IN
TRANSFORMER
- 2 Answers
- 4722 Views
- I also Faced
- E-Mail Answers
Answer Posted / kkumar
Neutral ct will put in transformer secondary neutral only,
its related to restricted earth fault relay. differntial
relay will operate any abnoraml current will occured in
windings.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
If we use 250A MCCB as a incomer in Control panel for a fault level of 50kA for one second ,assuming temperature rise from 85 Deg. to 100 Deg , Then what will be the Aluminium Bus-bar size for 250A MCCB? Explain in detail.
My question is whether bellow formula is correct to find bus size for 46kA for 0.5 second & what is RT in bellow formula. formula to calculate the size of busbar to withstand the thermal stresses due to currents with duration of 0.2 sec to 5 sec. Sp = RT( I x I x t) / K Where Sp – is the cross sectional area of bus bar in millimeters. I - is the value of AC fault current. t - is the operating time of disconnecting device in seconds. K – is the factor depending on the material of the conductor, insulation and initial and final temperature. Value of ‘k’ for copper is 143.
What is a feedback in control system?
What is mean by spike arrester(Voltage Operated)
What is the most essential condition for the voltage build up for a d.c. Shunt generator?
What the difference between ac and dc inductor an capacitor
how to interlock 3 incomer-ACB,1 buscoupler ACB,... pls answer this question and if possible send me the ckt diagram..haifriends2910@gmail.com
'documenˁ
it is in our knowledge tht right plug of supply of residential suppy system is phase n other is neutral...howevr the battery charger of mobile works in both ways...i mean it is not restricted in only one direction.ny of the holder of charger can hav phase .so y is it not lik tht phase of supply must b connected 2 phase of charger...?
why occ characteristics of generator is also called as magnatization characteristics ?
what is The difference between national electrical code and I.S.Code (electrical) and what is the value of NEC in electrical engineering field
Can we test the alignment of End shield and stator of turbogenerator without rotor insertion? Also how to fix maintain the alignment at site installation?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
Mention the disadvantages of low power factor?
CBCT selection
