Interested to Buy Any Domain ? << Click Here >> for more details...
what is total power generation in tamilnadu
What are the methods used powerfactor improved?
which place DC transmission line usde?
- 5 Answers
- 11952 Views
- I also Faced
- E-Mail Answers
Answer Posted / deepa.v
total power generation is 8500MW.Demand-11,500 t0 12,500MW
to improve power factor-using capacitors,synchronous
condensers
| Is This Answer Correct ? | 7 Yes | 3 No |
Post New Answer View All Answers
What is the tests required for a 132 kV, 400 kV , 765 kV for a Circuit Breaker and Power Transformer before commissioning ?
why h parameter are called as hybrid parameter?
In Air circuit breaker LSIG protection unit is used. Without fault in cables (2 runs 3Cx150Sq.mm Copper, 1Kv grade, XPLE armored cable IR value is more than 550Mohm @ 500V Megger) and load section Long time Overcurrent protection is triggers and trips the unit. We changed LSIG protection with new factory tested unit. Even then fault is persisting. Please suggest the possible causes
how is the cable tray designed & how its total length is calculated for an Industrial plant Say for Ex. (500KW Motor Load)
Explain the different methods used in the choice of rotor slots for reduction of harmonic torques in an induction motor.
how harmonics generated in induction furnance? how minimise it?
What are the differences between single phase and three phase?
what is rating boiler
What is the rotor frequency of 10 Hp 1440 RPM 50HZ 415V ?
What is deference between MCB & MCCB & ISOLATOR
How to calculate of maximum demand if given 628kw, 785kva, 0.8 p.f.
what is the purpose of slope in the differential relay?why we are using two slope?but in busbar differential we are using only one slope.why?
TRANSFORMERS WITH DC SUPPLY
in a solar power plant,we are going to step up the voltage 350V to 33kv, and to 132kv GSS. i want to ask that if it is possible that 315v/33kv is not possible because we also use 315v/11kv. or it should be 415v/33kv? is it effects generation or losses? the second question is-generation is depends on LV winding? or LV winding design for generation voltage?
how to calculate the earth mat design in 132 kv substation yard ????
