Interested to Buy Any Domain ? << Click Here >> for more details...
how many types of colling system it transformers?
- 8 Answers
- 20484 Views
- ONGC, I also Faced
- E-Mail Answers
Answer Posted / tanmoy
in transformer cooling system there is two type of cooling
system is used
1:-natural
2:-forced
and three type of cooling materials is used
1:-air
2:-oil
3:-water
cooling arrangement
1-air natural
2-oil natural
3-water natural
4-air forced
5-oil forced
6-water forced
7-air natural oil forced
8-oil natural air forced
9-oil forced air forced
10-oil natural air natural
11-air natural water natural
12-air forced water forced
13-air natural water forced
14-air forced water natural
15-oil natural water natural
16-oil forced water forced
17-oil natural water forced
18-oil forced water natural
| Is This Answer Correct ? | 2 Yes | 2 No |
Post New Answer View All Answers
What is tan delta & PPM in transformer? and whats its IS value?
How much inductance or resistance require as a starter in series with induction motor of specific capacity(e.g. 5 hp) ? What is formula for it ?
he compression ratio for a petrol engine generally lies between
How we can calculate the consumption in kwh of motor on basis of kw @100% load, @50% load & @ no load.
where is core-type and shell-type construction suitable for transformers ?
hi i have applied for lic of india south cenrtal zonal ,hyd. i didnt get hall ticket till now.let me know how can i get form internet
How generating electric power export to grid from the generating station ?
Where is the best place to mount distribution panel in a house.
hi, in the event earth grounding is not available in a project, is there any other way to make the elcb work? fyi, i have an instant water heater (6.5kw) installed, however if there is grounding in the heating element inside the heater assembly, i will get grounded. thank you in advance to those who will answer my question.
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
How can calculate the rating of a alternator for a given specific load with formula
Why increase in current leads to increase in conductor temperature?
How maesure earth neutral value & how much maximum value value required in between earth & neutral.
What should be the percentage increase in length of the dead end clamp for bus bar conductor (Hawthorn) after hydraulic pressing and what should be the applied pressure?
How to calculate no of EARTH PIT? Describe the formula as per IS standard?
