Interested to Buy Any Domain ? << Click Here >> for more details...
why permanent magnet generator have higher frequency of 400hz
- 3 Answers
- 9963 Views
- Jaypee, I also Faced
- E-Mail Answers
Answer Posted / a.p.nanjappa
400HZ IS BETTER FOR ACCURACY THAN 110HZ FOR CONTROL SYSTEM
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
There are a trformer and an induction machine. Those two have the same supply. For which device the load current will be maximum? And why?
What is Surge Capacitor? Why it is use in Generator Circuit Breaker?
Define cut-off rate?
What are the special cables required for explosion proof wiring?
I have a relay contact rated at 220v dc which is supplied with a 24vdc from the panel,for it to trip the dampers(24vdc).What if the application of the relay changes so that it should work at its rated 220vdc then will it work at 24vdc supply given or any other consideration needs to be taken .....
Can anyone please provide me details of MCCB/Contactor/SFU rating calculations for a motor feeder..for example 50 kw.. not from type-2 cordination chart. i want manual calculations..
What is stepper motor?
what is the safety of voltage power transformer(2250KVA0
we have provided 30 nos. relay contacts in panel.I want to know how do we do the numbering for the relay contacts as per any applicable standards
How is the connection of the tap changer on the HV side been made?
How much earthing frequency is capable?
What are the applications of the electric motors?
why single CT used in DOL starter power circuit?
In Power Line Communication (PLC) the wave trap is used to block communication signals from entering neighboring lines. My question is this: Why do they allow for different filtering arrangements on these wave traps? Isn't it always going to be a low pass filter since we want the power frequency to go through, and the comm signal blocked?
how to test and calculat the head and discharge in borewell compressor
