Interested to Buy Any Domain ? << Click Here >> for more details...
Why voltge arev transformed in to 132KV/66/KV/33KV like
that
- 5 Answers
- 9495 Views
- HAL, I also Faced
- E-Mail Answers
Answer Posted / anonymous
Bcoz there is a
loss of 10%
while
transmission of
current through
cable lines. So
instead of
transmitting
current in
multiples of 10,
its 10% extra is
transmittd dat
is in multiples
of 11 in order
to compensate d
loss.
| Is This Answer Correct ? | 0 Yes | 5 No |
Post New Answer View All Answers
what reason of line current and phase current in star connection and line current and phase current not equal in delta connection?
how can calculate resistance box for 15 kw, 6 pole, RV-230, RA-42 motor
Why it is possible to use PWM with a STATCOM and not with a conventional TCR based SVC
can anybody tell me that for p.f. Improvment we use capacitor banks but how to decide its capacitance. As we all know how to calculate kvar but what abt capacitance value
what is buffer resistance starter.?.What is the working principle and where it is used..?
Is any AC drive(VFD) had a feature of DC injection braking? if available please mention the detail. i.e drive can supply braking torque when the motor in idle state.
define superposition theorem thevnin theorem ,norton theorom?
2- What are the percentages between excitation currents in phase (R, S and T) in ∆ and Ỵ connections in excitation Current test in transformers?
for 100 HP Induction motor service factor is 1.2(SF) we placed a VFD at the motor side load is balance with 0.3 Amp's Phase to Phase but at incoming of VFD load is un-balance with 10 to 20 Amp's what will be cause of load un balance
what is cathodic protection and why it use in industries?
what is the use of static frequency converter and static excitation equipment? and where it is employed? for what?
our factory is going under construction mean time transformer 1000 kva 2 nos &load break swithch 12 kv & 4 nos 750 kva 2 nos & 380 kva 2 nos generator to be errcted.how to arrange earth pits &how to earth connect & neutral pit how to calculate in earth bit size.
I WANT TO know WHICH WAY IS BETTER FOR CONNECTION BETWEEN POWER TRANSFORMER AND MAIN DISTRIBUTION PANEL. 1-IS BETTER WE USE CABLE? 2-IS BETTER WE USE BUS DUCT? my transformer rate power is 2500KVA
why we are using earth pit in sub stations.?
An impedance of 100 ohms resistance and an unknown inductance is connected across the capacitor. The resulting impedance is a pure resistance of 500 ohms ifω = 10^5 rad/sec. calculate the values of inductor and capacitor.
