granite tiles laying 60/sq ft.how to convert in sq mt,what
is the mltiplying value.
- 5 Answers
- 7244 Views
- I also Faced
- E-Mail Answers
Answer Posted / reetheshmp
the multiplying value is 0.929
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
What are the different theories of failure under static load?
how ratio is calculated for any grade of concrete. for e.g. sppose M20 requires(x;y:z) quantity of cememt sand and aggregate.
Can someone please be curing period of the following according to IS codes Column beam slab brick masonry raft found. and also tell how many hours/day
What is made from large rocks, which protects the base of cliffs?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
cement, sand, aggregate,reinforcement & concrete consumption per square feet in multi storeyed building
Difference between lime, distemper and plastic emulsion?
I have completed building maintenance course in mcvc stream .. can I apply for the post of " sthapstya abhiyantriki sahayyak"?
what is the use of water bar in water tank and is this an extra item in estimate?
Before casting a basement roof slab which is connected with retaining wall surcharge load (i.e. sand or earth filling) outside the retaining wall is prohibited because of––
What is meant by a context menu in a cad software?
How to calculate quantity of plum masonry in 1:3:7
Why steel rods are produced only in even dimensions?
how to estimate costing from quantity givin in BOQ and according to this how we fill tender and final rate for perticular work.....?
Describe the sections included in a typical bill of quantities
