Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / ashvin timbadiya
CNC (Computer Numerical Control) is a particular application
usually to control a multi axis machine tool such as a
milling machine or a lathe but also could be a tube bending
machine punch press or similar. The CNC controller is
usually a purpose built controller using a micro computer
but could be a general purpose computer or a PLC. The
forerunner was NC (Numerical Control) before computers were
readily available, it used solid state logic and relays,
timers etc to provide the application.
A PLC (Programable Logic Controller) is a general purpose
logic controller specifically designed to allow the user to
create their own application. They select appropriate I/O
(Inputs Outputs) and perhaps function modules for purposes
such as communications and multi axis servo control and
program the PLC to perform the required functions.
| Is This Answer Correct ? | 8 Yes | 0 No |
Post New Answer View All Answers
What is Span Error
How RAL(Rotary air lock)works in cement industry?
How to Calibrate Level Switch in field
With N nodes and B branches what will have a network ???
What is zener diode? What is voltage regulator?
How to convert milliampares into flow??
1.what is controller proportional gain 2.what is the controller intergral action time. 3.A proportional plus derivative controller that has a proportional band of 20% and a derivative action time of 0.1 minutes. Construct the shape of the output waveform for the triangular input if the input rises and falls at the rate of 4 units per minute.
How to calibration a control valve?
Which language of programing is popular? how can i learn it ?
Which products are available in the Mass Systemswitch and System Manager AC range?
How do you identify between actual alarm and false alarm in a Temperature Transmitter in SCADA based Control System
you are on site,the plant trips,you are approached by operations,what do you do?
what is the protection system in solar turbine compressor
How to calculate P,I&D value in PID controller ?
it is possible to check the fail safe condition in pressure transmitter. if possible how?
