Interested to Buy Any Domain ? << Click Here >> for more details...
WHAT ARE THE BELT HORMONICS IN AC MACHINE HOW TO REDUCE IT
- 2 Answers
- 5080 Views
- DRDO, I also Faced
- E-Mail Answers
Answer Posted / shyam
The 5th, 7th, 11th, 13th, 17th, 19th order harmonics are
called Belt Harmonics and can be reduced by use of
Distributed Coil Groups.
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
In case of salient pole alternator when number of poles are 4 or more than 4 it helps the flux wave to be sinusoid as air gap length is increased from center to tip , but if the number of poles are 2 how does the flux wave is sinusoidal?
what are the analog quality input for protection function?what are minimum reqiments?
IN SINGLE PH TRANSFORMER IF LEKAGE IMPEDANCE DROP IS NEGLECTED ,THE FLUX IN THE MAGNETIC CORE and the lekage flux linking a winding are a)proportional to the applied v to the winding i respectively.
3Cx240 & 3Cx300 sqmm Al. cable from lv side. What is the calculation for this cable??
What is dynamo?How it works and what is the function of dynamo in a DG.
i want to know d working mechanism of tafe tractors next i like to know d engine type of apache bighs can anyone help me
It is desired to flood light the front of a building 42 meters wide and 16 meters hig.Projectors of 30 degree beam spread and 1000 watt lamps giving 20 lumen/watt are availabl.If the desired level of illumination is 75 lumen/m and show a suitable scheme.Assume the cofficient of utilization, deprecitation factor and waste light factor are 0.4, 13 and 1.2 respectively.
A power transformer 4MVA/11KV/0.415Kv has been out of use in 12years. what maintenance actions/test need to be carried out before energizing.
how to calculte capacitor range for single phase induction motors??pls tel
what do u understand about FACTS? how they are useful?
i karmveer bharti persuing b.tech . plz send me syllabus and name of reference books. for preparation of section eng.
What will be the fault current of any system when its generation is 10% of BASE generation( FUll Load )?Will is 10% or the same as full base calculation?
How do i right a ladder diagram that has 1 actuator that performs a full stroke followed by a half stroke
Why line VTG = √3 phase VTG in star? How?
We have a distribution transformer of 750KVA/11kv/440v and an AVR (Servo Stabilizer) of 750KVA on the LT side of distribution transformer. Also we have an ACB of 1200A on the output of distribution transformer (that is on the input of AVR). We want to have an MCCB on the output of AVR. What should be the rating?
