list down a few application of ac & dc in a generating
station?
Answer Posted / kaami
advantages of DC generating station
1)since, V=IZ where Z=IR+reactance. As, f=0,
so Z=IR.
2)No skin effect in DC
3)natural capacitance in overhead transmission in AC cause the charging current to flow in overhead line thus causing the loss in transmission line. since in dc, charging current is absent so no natural capacitance.
advantages of AC generating station
1)output voltage due to DC machine are limited mainly due to restriction on rotor and carbon brushes. Output voltage from ac machines can be achieved very high upto 33kv because power is taken from the stationary part.
2)main advantage is stepping up or stepping down voltage to transmit to large distances.
| Is This Answer Correct ? | 3 Yes | 3 No |
Post New Answer View All Answers
What is slip in an induction motor?
How can we design a HVAC Plant room which includes AHU,FCU,Chillers,Cooling towers, Pumps etc & how will they work? any Drawing if possible?
i need the curve duty cycle and amper for (150 kva @50% dyty cycle) transformer turn ratio :19 and vin 400
which mm cable should be used for 1.hp immersible pump motor for the distance of 330 metres?
what happen as when voltage drop(or may decrease) ? in case of atomic base theory?
Some times to change of DOR of a motor, interchange of R & B is not effected and RYB take same current, but interchange of R&Y is effected ie change the DOR. My doubt is what is the problem in motor and how it is happen.
What is the formulae of Megger value for a A.C.Motor
why fractional pitch winding generally used in alternators?
The power supplied to a 50mH inductor from a 120V, 60Hz source will be
What is meant by Im=30mA@Vk/2. How to know the kee point voltage for CT design
what are the preventive maintanance actions taken for air circuit breaker? please answer me
what is meant by 2 within a star in a voltmeter dial?
Sir 33kva 2 transformer load 900 amp calc 1800 amp mana jayega
How convergengr of nr method is not dependent on selection of slack bus and how gauss siedel method depends?
During Starter Panel Com missing I Found The Main Incomer 40Amp MCB 10KA Trip When Motor Change Star To Delta Motor Rating 20HP BUT When We Use Same MCB To Other Motor It Does Not trip Or What Is Necessaries for Star Delta Starter MCB SFU MPCB OR MCCB And What are The Breaking Capacity of MCCB in the Motor above 15HP